STEP 1 For small chips or cracks, no grinding or chiseling is required. For larger chips or cracks, grind or sand out the damaged area using the #100 grit sandpaper.
	STEP 2 Mix a small amount of filler with cream hardener (6 parts filler to 1 part hardener). Spread the filler into the damaged area. Allow the filler to dry for 10 minutes.
	STEP 3 Use #100 grit sandpaper to "wet" sand the filler until it is level with the rest of the fixture. Then use #220, #400, #600 and #1000 sandpaper to "wet" sand the repair area until it is smooth.
	STEP 4 Dry your repair with a hair dryer to pull out any moisture before applying finish paint.
	STEP 5 Apply one drop of base paint to your fixture with your finger. If the color matches, then no tint mixing is required. Wipe off the test area with a paper towel. If the color does not match, refer to our color matching instructions for tint mixing and color matching.
	STEP 6 After matching the color, pour paint into atomizer and shake thoroughly. Spray paint on repair and allow to dry 24 hours. Buff repair to bring out shine and blend it in with the rest of your fixture.

NOTE: This paint will NOT adhere to any surface that has not been sanded or prepared. Do not worry about OVERSPRAY of paint on your fixture since it will buff out, leaving only the sanded repair area painted.

EACH KIT CONTAINS:

1. Complete instruction manual, including color matching instructions.
2. Plastic spatula spreader for filler.
3. 5 sheets of wet-dry sandpaper (#100, #220, #400, #600, #1000 grit).
4. Preval atomizer sprayer.
5. 1 ounce jar of filler.
6. 1/4  ounce jar of cream hardener.
7. Tint bottles (3 milliliters each).
8. Base paint bottle (60 cc).

Home | Contact Us | About Us | Bath Kit | Testimonials | Quick Tips
How to Use Kit | Color Matching | FAQ's | Directions to our Office | Industry Links | ORDER KIT TODAY!